GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: HSRP Authentication posted 11/16/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


The reason it not shows up is because cisco is the default string for
authentication. 
So hsrp "always" uses authentication with the default password cisco.

Cheers,

Willy


-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
k c
Sent: zondag 16 november 2003 8:59
To: ccielab@xxxxxxxxxxxxxx
Subject: HSRP Authentication

Something strange! Problem in "standby 1 authen cisco", not show up
after typing the command? Any idea!
 
R6#sh run int f0/0
interface FastEthernet0/0
 ip address 137.10.74.6 255.255.255.192
 duplex full
 standby 1 ip 137.10.74.1
 standby 1 timers 7 17
 standby 1 priority 110
 standby 1 preempt
 standby 1 name ipexpert_r6
 standby 1 mac-address 0000.0c07.aaaa
 standby 1 track Serial4/0 20
end

R6#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
R6(config)#int f0/0                   
R6(config-if)#stand 1 authentication cisco          
R6#sh run int f0/0
Current configuration : 274 bytes
!
interface FastEthernet0/0
 ip address 137.10.74.6 255.255.255.192
 duplex full
 standby 1 ip 137.10.74.1
 standby 1 timers 7 17
 standby 1 priority 110
 standby 1 preempt
 standby 1 name ipexpert_r6
 standby 1 mac-address 0000.0c07.aaaa
 standby 1 track Serial4/0 20
end
Version: (C7200-JK9O3S-M), Version 12.2(15)T8,

Shining Friends!B&n$_&n3x!B73$k&p:q...
.v:)9aAn  1!$_3sC4
http://ringtone.yahoo.com.hk/

_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com

Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html