GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: Multicast over F/R posted 11/03/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


PIM NBMA mode has some performance improvements compare to pseudo-broadcast,
so it may be a good idea to enable it anyway.

Best regards,
Alexei

P.S.  On exam do what they ask, design practices good or bad are not
relevant.

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
ccie2be
Sent: Friday, October 31, 2003 8:44 AM
To: Group Study; Ozgur Guler (Garanti Teknoloji)
Subject: Re: Multicast over F/R


Thanks for your response.  That's what I had thought, but do you know why
that is?

dt
----- Original Message ----- 
From: "Ozgur Guler (Garanti Teknoloji)" <OzgurG@xxxxxxxxxxxxxx>
To: "ccie2be" <ccie2be@xxxxxxxxxx>
Sent: Friday, October 31, 2003 8:31 AM
Subject: RE: Multicast over F/R




no need to use it on the spokes.
it works wo nbma-mode on the spokes...

good luck in your forthcoming attempt.
Ozgur
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx]On Behalf Of
ccie2be
Sent: Friday, October 31, 2003 3:29 PM
To: Group Study
Subject: Multicast over F/R


Hi group,

I just saw an example from this link

http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/mcst_sol/frm_rlay.
h
tm

where the command, "ip pim nbma-mode"  was used on both the hub and the
spokes.

Why is this used on the spokes and is it required or optional on the spoke
interfaces?

Thanks, dt

_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com

Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html

This message and attachments are confidential and intended solely for the
individual(s) stated in this
message.If you received this message although you are not the addressee you
are responsible to keep the message confidential .The sender has no
responsibility for the accuracy or correctness of the information in the
message and its attachments.Our company shall have no liability for any
changes or late receiving,loss of integrity and confidentiality,viruses and
any damages caused in anyway to your computer system.

Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve
gizlidir.Bu mesajin muhatabi olmamaniza ragmen tarafiniza ulasmis olmasi
halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune uyulmasi
zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer alan
bilgilerin dogrulugu ve guncelligi konusunda gonderenin ya da sirketimizin
herhangi bir sorumlulugu bulunmamaktadir.Sirketimiz mesajin ve bilgilerinin
size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve
gizliliginin korunamamasindan, virus icermesinden ve bilgisayar sisteminize
verebilecegi herhangi bir zarardan sorumlu tutulamaz.

_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com

Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html