Pierre-Alex,
Router isis
No hostname dynamic
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
Pierre-Alex
Sent: Wednesday, September 24, 2003 12:11 PM
To: ccielab@xxxxxxxxxxxxxx
Subject: minor issue: IS-IS display
Is there a way to setup routers so that I can see the system id of the
routers instead of the hostnames?
Can't find an IOS command for this.... (see output below)
thanks,
Pierre-Alex
R5> sh isis dat
IS-IS Level-1 Link State Database:
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
R1.00-00 0x00000476 0x6F79 192 1/0/0
R1.05-00 0x00000474 0xAEED 157 0/0/0
R5.00-00 * 0x000000E7 0xB84B 1038 0/0/0
R2.00-00 0x000000E6 0x4837 992 0/0/0
R2.01-00 0x000000E6 0x7D6A 861 0/0/0
R5>sh clns nei
System Id Interface SNPA State Holdtime Type
Protocol
R2 To0 0007.78bc.dbe9 Up 9 L1 IS-IS
R1 Se1 *HDLC* Up 24 L1 IS-IS
R5>
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
