GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Destination pattern symbols posted 09/04/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


thanks Brian.  If I have the following dial-peer voice command, which one
will be used after I pressed

1) "1"
2) "12"
3) "123"

in a real phone and csim ?  Thanks.

dial-peer voice 1 voip
 destination-pattern 1
 session target ipv4:10.0.0.1
!
dial-peer voice 2 voip
 destination-pattern 12
 session target ipv4:10.0.0.1
!
dial-peer voice 3 voip
 destination-pattern .
 session target ipv4:20.0.0.2
!
dial-peer voice 4 voip
 destination-pattern .T
 session target ipv4:20.0.0.2


----- Original Message ----- 
From: "Brian McGahan" <bmcgahan@xxxxxxxxxxxxxxxxxxxxxx>
To: "'Alec'" <clapun@xxxxxxxxxxxxxxx>; "'Paul Chen'"
<cpjchen@xxxxxxxxxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
Sent: Thursday, September 04, 2003 2:20 AM
Subject: RE: Destination pattern symbols


> Alec,
>
> It will only match a single character then.  As soon as the
> single character is input, the router will do call setup.  This will not
> be true for the 'csim start' command though, since the string is sent
> all at once.  From an actual phone though, the string is sent 1
> character at a time.
>
> HTH
>
> Brian McGahan, CCIE #8593
> bmcgahan@xxxxxxxxxxxxxxxxxxxxxx
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-334-8987
> Direct: 708-362-1418 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: Alec [mailto:clapun@xxxxxxxxxxxxxxx]
> Sent: Wednesday, September 03, 2003 10:24 AM
> To: Brian McGahan; 'Paul Chen'; ccielab@xxxxxxxxxxxxxx
> Subject: Re: Destination pattern symbols
>
> So what if I use destination-pattern . for voice default route ?  What's
> the
> difference with .T ?
>
> ----- Original Message ----- 
> From: "Brian McGahan" <bmcgahan@xxxxxxxxxxxxxxxxxxxxxx>
> To: "'Paul Chen'" <cpjchen@xxxxxxxxxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
> Sent: Wednesday, September 03, 2003 4:22 PM
> Subject: RE: Destination pattern symbols
>
>
> > Paul,
> >
> > T actually means interdigit timeout.  The default interdigit
> > timeout is 10 seconds.  Each time you dial a digit, the router is
> going
> > to wait 10 seconds before doing call setup.  After 10 seconds have
> > expired, the router assumes that what you have entered so far is the
> > complete dial string, and does call setup on those digits.  You can
> > modify the interdigit timeout with the voice-port command 'timeouts
> > inter-digit'.
> >
> > The combination of the . (any single character) and the T (wait
> > for additional characters) effectively defines a default route for
> > voice.
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@xxxxxxxxxxxxxxxxxxxxxx
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-334-8987
> > Direct: 708-362-1418 (Outside the US and Canada)
> >
> >
> > -----Original Message-----
> > From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf
> Of
> > Paul Chen
> > Sent: Wednesday, September 03, 2003 3:05 AM
> > To: ccielab@xxxxxxxxxxxxxx
> > Subject: Destination pattern symbols
> >
> > Hi,
> >
> >
> >
> > Could someone please explain to me what these symbols mean:
> >
> >
> >
> > Destination-pattern .T
> >
> >
> >
> > A dot implies a single character right  ?
> >
> >
> >
> > The T symbol implies a variable length dial string.
> >
> >
> >
> > Does the combination of the 2 symbols mean dial any number ?
> >
> >
> >
> > Thanks.
> >
> > Paul
> >
> >
> >
> _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html