GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: show ip igmp group (stopped) posted 03/17/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


>From CCO:
The word "stopped" indicates that timing out of this entry is not
determined by this expire timer. 

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft
/121t/121t5/dtigmpv3.htm#1015409

Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) CCSI# 98640 
brian@xxxxxxxxxxxx

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
John Tafasi
Sent: Sunday, March 16, 2003 9:06 PM
To: ccielab
Subject: show ip igmp group (stopped)

Hi group,

Could some one explain what the word "stopped" means in the output of
the
"show ip igmp group" command executed on r7?

Thanks

John Tafasi

r7#show ip igmp group
IGMP Connected Group Membership
Group Address    Interface                Uptime    Expires   Last
Reporter
224.0.1.39       Ethernet1/0              05:56:31  00:02:10  150.50.7.7
224.0.1.39       Serial1/0                   05:57:03  stopped   0.0.0.0
224.0.1.40       Ethernet1/0              05:56:30  00:02:06  150.50.7.7
r7#




r7#sh ip igmp int s1/0
Serial1/0 is up, line protocol is up
  Internet address is 150.50.5.68/27
  IGMP is enabled on interface
  Current IGMP host version is 2
  Current IGMP router version is 2
  IGMP query interval is 60 seconds
  IGMP querier timeout is 120 seconds
  IGMP max query response time is 10 seconds
  Last member query response interval is 1000 ms
  Inbound IGMP access group is not set
  IGMP activity: 4 joins, 3 leaves
  Multicast routing is enabled on interface
  Multicast TTL threshold is 0
  IGMP querying router is 0.0.0.0 (this system)
  Multicast groups joined (number of users):
      224.0.1.39(1)
r7#
r7#