"ip igmp join-group" places a specific router interface in a multicast
group, but not its attached clients.
Check out:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
/ipcprt3/1cdmulti.htm#1033622
As mentioned before, "ip multicast helper-map" is what Oscar is looking for.
----- Original Message -----
From: "Valiente, Rafael" <rafael.valiente@xxxxx>
To: "'Sscar Dmaz Poveda'" <Oscar.Diaz@xxxxxxxxx>
Cc: <ccielab@xxxxxxxxxxxxxx>
Sent: Monday, February 03, 2003 6:20 AM
Subject: RE: Clients without Multicast Capabilities
> Hello
>
> If you wish that your clients in VLANX recieve multicast traffic from your
> server you need that router 1 be always joined to the group . To get this
> you has two options:
>
>
> ip igmp join-group a.b.c.d
>
> or
>
> ip igmp static-group a.b.c.d
>
> Both are interface command, you must configure it under lan interface and
> a.b.c.d is the multicast address used by your server.
>
> Static-group is better than join-group. With join-group the router
proccess
> the multicast stream, with static simply do forward.
>
> Regards
>
> Rafa
>
>
> -----Mensaje original-----
> De: Sscar Dmaz Poveda [mailto:Oscar.Diaz@xxxxxxxxx]
> Enviado el: lunes 3 de febrero de 2003 10:01
> Para: ccielab@xxxxxxxxxxxxxx
> Asunto: Clients without Multicast Capabilities
>
>
> Dear colleagues,
>
> How can I do that clients in VLAN X without Multicast capabilities are
able
> to reach the Multicast Servers?:
>
> VLAN X ------ Router 1 ------ PIM Dense Mode ------ Router 2 -------
> Multicast Servers
>
> Thanks a lot in advance.
>
> Best regards,
>
> Oscar.
>
>
>
____________________________________________________________________________
> ___
> Disclaimer
>
> This email is confidential and intended solely for the use of the
individual
> to
> whom it is addressed. If you are not the intended recipient, be advised
that
> you have received this email in error and that any use, dissemination,
> forwarding, printing, or copying of this email is strictly prohibited.
>
> Although Azlan Group plc has taken reasonable precautions to ensure no
> viruses are present in this email, the company cannot accept
responsibility
> for any loss or damage arising from the use of this email or attachments.
>
> Employees of Azlan Group plc and its affiliates are expressly required not
> to
> make defamatory statements and not to infringe or authorise any
> infringement of copyright or any other legal right by email
communications.
> Any such communication is contrary to company policy and outside the
> scope of the employment of the individual concerned. The company will
> not accept any liability in respect of such communication, and the
> employee responsible will be personally liable for any damages or other
> liability arising.
>
> For further assistance on email policy, or if you have received this email
> in
> error, please contact the Azlan Group MIS Helpdesk on
> +44 (0) 118 989 7788 or by email at help.desk@xxxxxxxxxx
>
> Azlan Group plc, Azlan House, Mulberry Business Park, Fishponds Road,
> Wokingham, RG41 2GY. www.azlan.com.
> .
> **********************************************
> Noticia legal
> Este mensaje electrsnico contiene informacisn de BT Ignite Espaqa S.A.U.
que
> es privada y confidencial, siendo para el uso exclusivo de la persona (s)
o
> entidades arriba mencionadas. Si usted no es el destinatario seqalado, le
> informamos que cualquier divulgacisn, copia, distribucisn o uso de los
> contenidos esta prohibida. Si usted ha recibido este mensaje por error,
por
> favor borre su contenido lo antes posible.
> Gracias.
> .
.
__________________________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab
