OT: back to back T1 connection

["Tony H." <aamercado31@xxxxxxxxx>]

HI

I am trying to do back to back btwn the following:

MC3800#A (2 Channelized T1/PRI port(s))
MC3800#B (1 Channelized T1/PRI port(s)) T1 (1 Port)
2600 with Multi-Flex Trunk WAN daughter card and IMA 4
port T1 Port adapter

I am following the CCO doc:
http://www.cisco.com/en/US/tech/tk713/tk584/technologies_configuration_example09186a00800a6b82.shtml

r5 (3810#A)
controller T1 0
 framing esf
 clock source internal
 linecode b8zs
 channel-group 1 timeslots 1 speed 64

interface Serial0:1
ip address 5.5.5.5 255.255.255.0
encapsulation ppp

r6 (3810#B)
controller T1 0
 framing esf
 linecode b8zs
 channel-group 1 timeslots 1 speed 64

interface Serial0:1
 ip address 5.5.5.6 255.255.255.0
 encapsulation ppp


and check my cabling with:
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml
as T1 CSU/DSU
1-4
2-5
4-1
5-2

Can't ping..any insights or this is not possible? thx



__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
.
__________________________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab