Re: IOS Upgrade posted 12/01/2002
If the router in question is c2500 or c2600, the instructions I sent u will
----- Original Message -----
From: "Lo Whitfield" <lwhitfield01@xxxxxxxxxxxxx>
To: <ccie2b@xxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
Sent: Sunday, December 01, 2002 12:34 AM
Subject: Re: IOS Upgrade
> Hello CCIE2b,
> You have to perform a format or erase on the flash pending on your version
> of the IOS. Then you have to perform a squeeze to free up the disk space.
> Good Luck,
> ----- Original Message -----
> From: <ccie2b@xxxxxxx>
> To: <ccielab@xxxxxxxxxxxxxx>
> Sent: Saturday, November 30, 2002 6:56 PM
> Subject: IOS Upgrade
> > I am having a problem upgrading my IOS. I have 16M Flash and 16M
> Here is the output of show ver:
> > cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
> > Processor board ID 02936846, with hardware revision 00000001
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > Basic Rate ISDN software, Version 1.1.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 2 Serial network interface(s)
> > 8 Low-speed serial(sync/async) network interface(s)
> > 1 ISDN Basic Rate interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read ONLY)
> > When I try to do a copy tftp flash, I get the following message:
> > %Error: Image size exceeds free space
> > The image I am trying to load is only 14,152KB in size. It seems that I
> do have enough space for this image, could anyone help to explain this?
> Thanks in advance...