GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: BGP Conditional Advertisement. posted 11/07/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Thanks, Brian!

I am using 12.1(5)T9, has Cisco fix the bug in this version?


E.D.

----- Original Message -----
From: "Brian McGahan" <brian@xxxxxxxxxxxxxxx>
To: "'enginedrive2002'" <enginedrive2002@xxxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
Sent: November 7, 2002 2:52 PM
Subject: RE: BGP Conditional Advertisement.


> The state "uninitialized" usually indicates the bug CSCdp20320.
>
>
> CSCdp20320 Bug Details
>
>
> Headline  BGP:conditional advertisement state is Uninitialized
> Product  all Model
> Component  bgp Duplicate of
> Severity  2 Status  Resolved
> First Found-in Version  12.0(6.5)T03   All affected versions  First
> Fixed-in Version  12.1(0.8), 12.1(0.8)T, 12.0(9.1)ST, 12.0(8.6)ST,
> 12.1(1)DC, 12.1(1)DB  Version help
> Release Notes
>
> A Cisco router that is running Cisco IOS Release 12.0 T with conditional
>
> advertisement does not advertise the prefixes specified in
> advertise-map. There is no workaround.
>
>
> Try changing IOS trains.
>
> HTH
>
> Brian McGahan, CCIE #8593
> Director of Design and Implementation
> brian@xxxxxxxxxxxxxxx
>
> CyscoExpert Corporation
> Internetwork Consulting & Training
> Voice: 847.674.3392
> Fax: 847.674.2625
>
>
> > -----Original Message-----
> > From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf
> Of
> > enginedrive2002
> > Sent: Thursday, November 07, 2002 11:13 AM
> > To: ccielab@xxxxxxxxxxxxxx
> > Subject: BGP Conditional Advertisement.
> >
> > I am trying the same lab as the link below for BGP conditional
> > advertisement:
> >
> http://www.cisco.com/en/US/tech/tk648/tk365/technologies_configuration_e
> xa
> > mpl
> > e09186a0080094309.shtml
> >
> >
> > I use the same configuration for all the routers, however, when I run
> "sh
> > ip
> > bgp nei 10.10.10.1" like it does in example 1, the output is
> different:
> > "Condition-map nonexist, Advertise-map advertise, status:
> Uninitialized",
> > where in the example shows the "status: withdraw".
> >
> > At this time, 128.16.16.0/24 is not in R101 BGP table, but
> 192.168.50.0/24
> > does, which is correct. After I shut down R103 serial interface, the
> > network
> > 192.168.50.0/24 will be gone in R101 BGP table, but 128.16.16.0/24
> doesn't
> > show up. I think this probably related to the "status: Uninitialized"
> show
> > above, but I don't know how to fix it.
> >
> > Could anyone please help me on this? Thank you!
> >
> >
> > E.D.

______________________________________________________________________ 
Post your ad for free now! http://personals.yahoo.ca