GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Why is this happening ? posted 10/23/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Folks,
I am trying to understand why this Named ACL is behaving like this


First I make the NACL

Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip access-list standard BGP-ROUTE-TO-USTRUST
Router(config-std-nacl)#permit 192.168.107.0
Router(config-std-nacl)#permit 162.93.0.0
Router(config-std-nacl)#deny 10.191.0.0 0.0.255.255
Router(config-std-nacl)#deny 10.190.0.0 0.0.255.255
Router(config-std-nacl)#permit 10.0.0.0
Router(config-std-nacl)#permit 172.16.0.0
Router(config-std-nacl)#end
Router#w
1d22h: %SYS-5-CONFIG_I: Configured from console by consoler m
Building configuration...
[OK]



Then when I display the ACL the order of the permit and deny statements comes up all messed up . Am I missing something really fundamental here ?


Router#sho ip access BGP-ROUTE-TO-USTRUST Standard IP access list BGP-ROUTE-TO-USTRUST permit 192.168.107.0 permit 10.0.0.0 permit 172.16.0.0 permit 162.93.0.0 deny 10.191.0.0, wildcard bits 0.0.255.255 deny 10.190.0.0, wildcard bits 0.0.255.255 Router#


Thanks


===========================================================
     |        |         | Jaspreet Bhatia, CCIE # 10347
    |||      |||        | High Touch Technical Support
 .:|||||:..:|||||:.     | Phone: 408.527.0303
 Cisco Systems, Inc.    | Fax: 408.527.2281
			      | 24x7 Support Center: 800.495.9121
===========================================================