GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Solie' s page 438 posted 08/23/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


you are correct,
Solie seems to be full of errors

rgds
----- Original Message -----
From: Hotmail <ccie_yong@xxxxxxxxxxx>
To: Nick Shah <nshah@xxxxxxxxxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
Sent: Friday, August 23, 2002 6:05 PM
Subject: Re: Solie' s page 438


> Hi,
>
> The 1st query was from CCIE practical studies Vol I by Karl Solie, on page
> 438, it configure the "frame class voice" on the serial subinterface, but
I
> thought u need additional command (frame traffic-shaping) on the serial
main
> interface to make it work.
>
> regards
> Yong
>
> ----- Original Message -----
> From: "Nick Shah" <nshah@xxxxxxxxxxxxxx>
> To: "Hotmail" <ccie_yong@xxxxxxxxxxx>; <ccielab@xxxxxxxxxxxxxx>
> Sent: Friday, August 23, 2002 3:36 PM
> Subject: Re: Solie' s page 438
>
>
> > I am not sure what you mean here, I am not having Solie atm. So pl. be
> > specific about the first query.
> >
> > Regarding the second query.
> >
> > IP RTP PRIORITY specifies ports to be prioritized, and guaranteed
> bandwidth
> > to be assigned, can be used with voice & anythign else as well.
> > IP RTP Header - compression, compresses data.
> >
> > They usually go hand in hand, however there is a catch, you need to
> specify
> > "bandwidth" after compression (if using RTP header compression along
with
> > priority)
> >
> > You can also use     ip rtp priority  on its own (without rtp
compression)
> >
> > If using on non-frame relay interfaces, use IP RTP PRIORITY, and if
using
> on
> > frame-relay, ideally, specify a map-class and specify frame-relay ip rtp
> > priority.
> >
> > rgds
> > Nick
> > ----- Original Message -----
> > From: Hotmail <ccie_yong@xxxxxxxxxxx>
> > To: <ccielab@xxxxxxxxxxxxxx>
> > Sent: Friday, August 23, 2002 4:54 PM
> > Subject: Solie' s page 438
> >
> >
> > > Hi, on Solie's pg 438, Thought that you need an additional command of
> > > "frame-relay traffic-shaping" in interface s2/0 if configure
> "frame-relay
> > > class voice" in interface s2/0.1 point-to-pt and secondly is it always
> > that
> > > when there is "frame-relay ip rtp priority ...." command in map-class
> > mode, it
> > > will have to work in conjunction with "frame-relay ip rtp
> > header-compression"
> > > command in interface mode ?
> > >
> > > Thanks & Regards
> > > Yong
> > > _________________________________________________________________
> > > Commercial lab list: http://www.groupstudy.com/list/commercial.html
> > > Please discuss commercial lab solutions on this list.
_________________________________________________________________
Commercial lab list: http://www.groupstudy.com/list/commercial.html
Please discuss commercial lab solutions on this list.
__________________________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab