GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Snapshot routing on Dialer Interfaces posted 08/22/2001
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hi, 
I tried  for snapshot in dialer 0 use the following command
 #dialer snapshot (same function like that #dialer map snap in BRi). for IP.

I m still not successful in IPX DDR,

Regards.
Peng
----- Original Message ----- 
From: "SALMON, MARK (SBMS)" <MARK.SALMON@xxxxxxxxxxxx>
To: <>
Sent: Tuesday, August 21, 2001 12:12 PM
Subject: Snapshot routing on Dialer Interfaces


> Has anyone ever configured and successfully tested snapshot routing on
> dialer interfaces? Here is my config.  Mine will not initiate the call at
> all.
>  
>  
> interface Dialer1
>  ip address 172.30.232.3 255.255.255.0
>  no ip directed-broadcast
>  encapsulation ppp
>  ip ospf network point-to-point
>  dialer remote-name r5
>  dialer pool 1
>  dialer idle-timeout 180
>  dialer string 8358662 class dial1
>  dialer load-threshold 64 outbound
>  dialer-group 1
>  ipx network 33335555
>  snapshot client 5 8 dialer
>  ppp callback accept
>  ppp authentication chap
> end                              
>  
> dialer-list 1 protocol ip list 199
> dialer-list 1 protocol ipx permit 
>  
> Mark Salmon
> Sr. WAN Engineer Great Lakes Region 
> Cingular Wireless
> 2000 Ameritech Center Drive 3F07B
> Hoffman Estates IL 60195
> Voice: (847)765-3999
> Pager: (847)992-0458
> Email: mark.salmon@xxxxxxxxxxxx
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab