GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: DLSW+ Encapsulation posted 01/31/2001
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Indeed true - you need to use TCP to support Ethernet bridge domains...

Regards,

Justin Menga  CCIE #6640  MCSE+I  CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864   Mobile:  (+64) 25 349 599
mailto: justin.menga@xxxxxxxxxxxxxxxxxx



-----Original Message-----
From: Simon Hope [mailto:shope@xxxxxxxxxxx]
Sent: Wednesday, January 31, 2001 11:35 PM
To: Ccielab
Subject: Re: DLSW+ Encapsulation


I thought DLSW with FST and Direct encap only supported token ring attached
endstations, not Ethernet attached endstations. with FST you can have
ethernet in the IP cloud obviously. As your end stations are ethernet
attached then traffic will not be passed. FST also does not support local
ack, so will pass the RIF thru to the remote ring

I remember reading this in Cisco Network Design and Case Studies, see
chapter 8: DLSW Advanced features.

Cheers

Simon

----- Original Message -----
From: "Keith Leonard" <Keith_Leonard@xxxxxxxxxxxx>
To: "Stanford Wong - CNS" <stanford@xxxxxxxxxxxxxx>
Cc: "Ccielab" <ccielab@xxxxxxxxxxxxxx>; <nobody@xxxxxxxxxxxxxx>
Sent: Wednesday, January 31, 2001 10:13 AM
Subject: Re: DLSW+ Encapsulation


>
> Try putting a 'remote-peer' statement on router1 instead of the
> 'promiscuous' command. Then try some debugs.
>
> Keith
>
> _______________________________________________________
> To unsubscribe from the CCIELAB list, send a message to
> majordomo@xxxxxxxxxxxxxx with the body containing:
> unsubscribe ccielab
>

_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab

_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab