Using debug IPX packet, IPX is keeping my DDR link active. Are their any
recommendations as to how to suppress these?
4d05h: IPX: Lo0:201.0000.0000.0002->201.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, rcvd
4d05h: IPX: Lo0:201.0000.0000.0002->201.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, bad pkt
4d05h: IPX: BR0/0:404.0000.0000.0004->404.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, rcvd
4d05h: IPX: BR0/0:404.0000.0000.0004->404.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, local
4d05h: IPX: Fa0/0:202.00e0.1e60.3c67->202.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, rcvd
4d05h: IPX: Fa0/0:202.00e0.1e60.3c67->202.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE, local
4d05h: IPX: Fa0/0:301.0010.7b81.3ff3->301.ffff.ffff.ffff ln= 70 tc=00 pt=00
ds=85BE ss=85BE
I can't filter the network as I need it in my IPX routing table....should I
use Snapshot routing? I can post my configs if needed...but they're rather
lenghty..
Thanks for the help....
Michael Schlenger
Consulting Engineer
N2N Solutions
mschlenger@xxxxxxxxxxxxxxxx
cell: 847.452.6246
_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab
