GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Changing the control sequence posted 01/13/2001
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


It is   escape-character if you're in config mode.
If you're in a EXEC-MODE, then u need to prefix that with "terminal".
Also, if you do a "show line" for the line that you're logged into, it
will show the escape character for the current session.

Regds/ tom
----- Original Message -----
From: David Ankers <d.ankers@xxxxxxxxx>
To: <ccielab@xxxxxxxxxxxxxx>
Sent: Friday, January 12, 2001 7:08 PM
Subject: Re: Changing the control sequence


> As Tom said this is the correct thing to do but that little <char> thing
> might cause you some trouble :-)
>
> You need to use the ASCII codes if you want to enter non-normal chars a
> favourite is 23 which is ctrl-shft-w. Also, the command is just
> "escape-character" for the 2500s here anyway.
>
> If you have to set troubleshooting challenges for anyone, change the
escape
> char on the terminal server to be a normal letter (helps if you know the
> password so a least they can login), quite entertaining watching someone
find
> the solution which is of course to type is caps.
>
>
> On Friday 12 January 2001 23:02, Thomas Alexander wrote:
> > You can either put it int the vty config or change it for the current
> > session.
> >
> > I actually prefer doing on the fly from user exec or enable mode which
> > only changes it for the current logged in session.
> >
> > That way you dont mess around with other people logging in and
> > not knowing the escape-sequence.
> >
> > terminal escape-character  <char>
> >
> > can be entered  in config mode or from exec.
> >
> > Regds/ Tom
> > ----- Original Message -----
> > From: Don Rogers <drogers@xxxxxxxxxxx>
> > To: <ccielab@xxxxxxxxxxxxxx>
> > Sent: Friday, January 12, 2001 3:59 PM
> > Subject: Changing the control sequence
> >
> > > I would like to change the control sequence from "control+shift+6,x"
to
> > > something else.  Really do not care what.  I have nested terminal
> > > servers. I need a different sequence on each server.  I can not find
the
> > > command.
> > >
> > > Any help will be appreciated.  Just point me in the right direction.
> > >
> > > Thank you.
> > >
> > > _______________________________________________________
> > > To unsubscribe from the CCIELAB list, send a message to
> > > majordomo@xxxxxxxxxxxxxx with the body containing:
> > > unsubscribe ccielab
> >
> > _______________________________________________________
> > To unsubscribe from the CCIELAB list, send a message to
> > majordomo@xxxxxxxxxxxxxx with the body containing:
> > unsubscribe ccielab
>
> _______________________________________________________
> To unsubscribe from the CCIELAB list, send a message to
> majordomo@xxxxxxxxxxxxxx with the body containing:
> unsubscribe ccielab


_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab