![]() |
![]() |
|||||||||||||||||||
|
||||||||||||||||||||
|
ip multicast posted 11/18/2000
|
|
Hi, all
The follow is the result from an router to ping an multicast address.
====================================================================
r14#
r14#ping 224.10.1.2 Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.10.1.2, timeout is 2 seconds: U r14# r14#ping 224.10.1.2 Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.10.1.2, timeout is 2 seconds: U r14#ping Protocol [ip]: Target IP address: 224.10.1.2 Repeat count [1]: 4 Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 4, 100-byte ICMP Echos to 224.10.1.2, timeout is 2 seconds: U Reply to request 1 from 10.1.5.2, 8 ms Reply to request 1 from 10.1.5.3, 8 msU Reply to request 3 from 10.1.5.2, 8 ms Reply to request 3 from 10.1.5.3, 8 ms r14# ====================================================================
Why r14 can't get reply if it only ping once time?
any input are appreciate!
Thanks in advance!
Best regards
Perry.Zhu |