GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Antwort: telenet question posted 05/11/2000
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]




Hi

When you use Ctrl+Shift+6+x    on r1 then you disconnect the session to r2.
In that case you can´t reach r3 or r2
When you are connected via telnet to r2 and then via telnet to r3 type only
"exit" at r3 and you only disconnect the telnet session to r3.
Thats the way

regards
Mit freundlichen Grüßen

Kai Welsch / wk , GS KA  Systemengineer
NEEF-Elektrotechnik GmbH & Co
Systemhaus für Gebäude- und Kommunikationstechnik
Unternehmen der Sulzer Infra
Windeckstrasse 9      76135 Karlsruhe
Tel: +49 721/8606-238
Fax: +49 721/8606-232
E-Mail/Internet: Kai_Welsch@xxxxxxx
Notes: Kai Welsch/Infra CS @SULZERINFRA
Website: http://www.neef.de/


_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing:
unsubscribe ccielab