Re: OSPF into IGRP posted 04/05/2000
This does *NOT* work.... summary-address is used for redistribution into
OSPF from other protocols.. The fact that it even kinda works (until you
reboot from what I've seen) is more of a bug then anything... In fact, I
just tried it on 12.0 and I doesn't even "kinda" work, but it did in 11.2.
Again, unless you have multiple classful networks to work with there is no
way to get this done without static routes.
----- Original Message -----
From: "Henry Steuart" <henry@xxxxxxxxxxxxxxxxxxxx>
Sent: Tuesday, April 04, 2000 11:12 AM
Subject: Re: OSPF into IGRP
> Use the ospf "summary address" command on your ASBR to advertise the /24s
> that cover the smaller subnets. Then redistribute OSPF into IGRP. It is
> "hack", but required if you need to use a classful protocol like IGRP or
> (config)#router ospf 1
> (config-router)#ospf summary-address 18.104.22.168 255.255.255.0
> ! covers any smaller (/25 thru /32) subnet in the 22.214.171.124 /24 space...
> Henry Steuart
> CCSI# 97174
> At 11:49 AM 4/5/00, you wrote:
> >Hi all,
> >Need some help here..
> >I am trying to redistribute OSPF into IGRP....
> >OSPF have some /24 /29 /30 routes whereas IGRP have only
> >/24 routes....
> >all of them are in 126.96.36.199 networks.
> >What are the command to redistribute all the subnets from OSPF into
> >How do I summarize those /29 and /30 routes into /24 routes in OSPF ??
> >To unsubscribe from the CCIELAB list, send a message to
> >majordomo@xxxxxxxxxxxxxx with the body containing:
> >unsubscribe ccielab
> To unsubscribe from the CCIELAB list, send a message to
> majordomo@xxxxxxxxxxxxxx with the body containing:
> unsubscribe ccielab
To unsubscribe from the CCIELAB list, send a message to
majordomo@xxxxxxxxxxxxxx with the body containing: