hi group,
I bought one 32(2*16MB) mb flash.
i cant upgrade the flash. i am trying using following methods:
1) boot the router with a good flash image and then take that flash out and
insert the new flash. as 3640 take the ios image into DRAM and run from there.
then using cpy tftp: flash: command
and it can't erase the flash. at some point of erasing the router just
stuck. i got the following result:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Router#copy tftp: flash:
Address or name of remote host
[172.16.1.2]?
Source filename
[c3640-jk9o3s-mz.124-5a.bin]?
Destination filename
[c3640-jk9o3s-mz.124-5a.bin]?
%Warning:There is a file already existing with this
name
Do you want to over write? [confirm]
Accessing
tftp://172.16.1.2/c3640-jk9o3s-mz.124-5a.bin...
Erase flash: before copying? [confirm]
Erasing the flash filesystem will remove all files! Continue?
[confirm]
Erasing device...
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
(IT STUCK HERE )
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2)
then i tried from rommon mode using xmodem command. but still i failed
because it says it cann't erase the flash.
Is there any other way that i can use to upgrade the flash.
any help will be highly appreciated.
Thanks
Bhuyan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=18928&t=18928
--------------------------------------------------
Read http://www.groupstudy.com/list/guide.html before POSTING!
To change your subscription, read the directions on:
http://www.groupstudy.com/list/Associates.html
