hi all in group
how to tackle the collision and deferred errors on a pix 515.
the following information is from our pix 515
interface ethernet0 "inside" is up, line protocol is up
Hardware is i82559 ethernet, address is 00f5.3190.19c6
IP address 10.0.0.22, subnet mask 255.255.0.0
MTU 1500 bytes, BW 10000 Kbit half duplex
3915 packets input, 2528872302 bytes, 0 no buffer
Received 429 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3257 packets output, 3027894 bytes, 0 underruns
0 output errors, 275 collisions, 0 interface resets
0 babbles, 0 late collisions, 45 deferred
0 lost carrier, 0 no carrier
interface ethernet1 "outside" is up, line protocol is up
Hardware is i82559 ethernet, address is 00f5.3190.19c7
IP address 212.196.107.10, subnet mask 255.255.255.128
MTU 1500 bytes, BW 10000 Kbit half duplex
3339 packets input, 1894487734 bytes, 0 no buffer
Received 163 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
2725 packets output, 241003 bytes, 0 underruns
0 output errors, 85 collisions, 0 interface resets
0 babbles, 0 late collisions, 128 deferred
0 lost carrier, 0 no carrier
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=9135&t=9135
--------------------------------------------------
Read http://www.groupstudy.com/list/guide.html before POSTING!
To change your subscription, read the directions on:
http://www.groupstudy.com/list/Associates.html
