To use dialer profiles you must first remove legacy DDR configurations. Send
us your entire config to see which configurations you must remove. Legacy
DDR include the following commands:
dialer map ip
dialer-group
Dialer Profiles include:
dialer pool-member
dialer string
dialer pool
Ednilson Rosa
----- Original Message -----
From: "Magdy Ibrahim"
To:
Sent: Tuesday, March 13, 2001 8:17 PM
Subject: ISDN Legacy DDR conf. [1:2604]
Dear All,
Please help
I tried to link two dialer interface to my ISDN "single" BRI 0.
When I typed this command: dialer pool-member 1
under int bri1/0
the router gives me this message and refuse that command
%Remove Legacy DDR Configuration first
Please how can I remove this legacy DDR congf.
here is my bri conf.:
interface BRI1/0
description connected to Dial-inPCs(ISDN)
no ip address
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
isdn switch-type basic-net3
no fair-queue
no cdp enable
Please help me soon
Thanx
Magdy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=2604&t=2604
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=2608&t=2604
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html
