Can you please verify your answer to question to this question.
>Which frame has a Type field to identify the upper-layer protocol?
>> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
>the answer is: D.
I just remember that 802.2, 802.5 has DSAP(destination service access point)
field whose purpose is to identify the upper layer (or network layer)
protocol type of packet. So aside from D, A and B should also be an answer.
-----Original Message-----
From: Magdy H. Ibrahim
To: associate@xxxxxxxxxxxxxx
Date: Sunday, February 04, 2001 9:50 PM
Subject: Re: Help,Help,help!!!! [1:1855]
>Hi Peter,
>Here is the Answers of your questions:
>
>> . Which commands will restart the router?
>> A. system restart
>> B. restart
>> C. shutdown system
>> D. down
>> E. system exit
>non of these answers are valid
>
>> Which command would you use to find the parameters for the clock?
>> A. cl? B. show cl ? C. show cl? D. cl ?
>B.
>
>> Which layer hides details of any network-dependent information from the
>> higher layers by providing transparent data transfer?
>> A. Session B. Transport C. Network D. Data Link E. Physical
>B.
>
>> What command to disable edit mode?
>> A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
>> default
>I think D
>
>> Which frame has a Type field to identify the upper-layer protocol?
>> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
>the answer is: D.
>
>> You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
>> What is your class of address, subnet address, and broadcast address?
>> A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C.
172.16.4.49
>> to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62
>I think there is an error in this question this subnetmask made the class
is
>C, subnet address 172.16.13.0 and the broadcast is 172.16.13.127
>Please anyone to check this.
>
>> If you have a 27-bit subnet mask, how many subnets and how many
>> hosts do you have?
>> A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286
>subnets,
>> 30 hosts D. 65,234 subnets, 62 hosts
>C.
>
>> Which layer defines the physical topology?
>> A. Application B. Presentation C. Transport D. Network E. Physical .
>E.
>
>> What command sets up a secondary IP address of 192.15.1.7 with a
>> class C netmask?
>> A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7
2555.0.0.0
>> secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
>> 192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
>> 255.255.255.0
>D.
>
>> What was the default Ethernet encapsulation on NetWare 3.11?
>> A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap
>B.
>
>> What does CIDR stand for?
>> A. C-class inter-domain routing B. Classfull inter-domain routing C.
>> Classless internet domain routing D. Classless inter-domain routing
>B.
>
>> Which of the following switching types is the default for Cisco 5505s?
>> A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free
>B.
>
>I think these Answers are correct but also I hope everybody help to confirm
>these answers.
>
>Regards,
>
>Magdy H. Ibrahim
>MCSE, CCNA
>System Administrator
>Purenet Internetworking
>
>
>
>"Peter Peter" wrote in message
>news:200102040443.XAA12469@xxxxxxxxxxxxxxxxx
>> . Which commands will restart the router?
>> A. system restart
>> B. restart
>> C. shutdown system
>> D. down
>> E. system exit
>>
>> Which command would you use to find the parameters for the clock?
>> A. cl? B. show cl ? C. show cl? D. cl ?
>>
>> Which layer hides details of any network-dependent information from the
>> higher layers by providing transparent data transfer?
>> A. Session B. Transport C. Network D. Data Link E. Physical
>>
>> What command to disable edit mode?
>> A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
>> default
>>
>> Which frame has a Type field to identify the upper-layer protocol?
>> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
>>
>> You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
>> What is your class of address, subnet address, and broadcast address?
>> A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C.
172.16.4.49
>> to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62
>>
>> If you have a 27-bit subnet mask, how many subnets and how many
>> hosts do you have?
>> A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286
>subnets,
>> 30 hosts D. 65,234 subnets, 62 hosts
>>
>> Which layer defines the physical topology?
>> A. Application B. Presentation C. Transport D. Network E. Physical .
>>
>> What command sets up a secondary IP address of 192.15.1.7 with a
>> class C netmask?
>> A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7
2555.0.0.0
>> secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
>> 192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
>> 255.255.255.0
>>
>> If you want to configure the router configuration stored in NVRAM, which
>> command should you use?
>> A. config t B. config mem C. config TFTP D. config startup-config
>>
>> What was the default Ethernet encapsulation on NetWare 3.11?
>> A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap
>>
>> What does CIDR stand for?
>> A. C-class inter-domain routing B. Classfull inter-domain routing C.
>> Classless internet domain routing D. Classless inter-domain routing
>>
>> Which of the following switching types is the default for Cisco 5505s?
>> A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free
>>
>>
>>
>> Message Posted at:
>> http://www.groupstudy.com/form/read.php?f=1&i=1855&t=1855
>> --------------------------------------------------
>> You are reading GroupStudy's Associate Mailing List. To unsubscribe
>follow
>> the directions on http://www.groupstudy.com/list/Associates.html
>>
>
>
>
>
>Message Posted at:
>http://www.groupstudy.com/form/read.php?f=1&i=1863&t=1855
>--------------------------------------------------
>You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
>the directions on http://www.groupstudy.com/list/Associates.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=1864&t=1855
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html
