Hi Peter,
Here is the Answers of your questions:
> . Which commands will restart the router?
> A. system restart
> B. restart
> C. shutdown system
> D. down
> E. system exit
non of these answers are valid
> Which command would you use to find the parameters for the clock?
> A. cl? B. show cl ? C. show cl? D. cl ?
B.
> Which layer hides details of any network-dependent information from the
> higher layers by providing transparent data transfer?
> A. Session B. Transport C. Network D. Data Link E. Physical
B.
> What command to disable edit mode?
> A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
> default
I think D
> Which frame has a Type field to identify the upper-layer protocol?
> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
the answer is: D.
> You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
> What is your class of address, subnet address, and broadcast address?
> A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C. 172.16.4.49
> to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62
I think there is an error in this question this subnetmask made the class is
C, subnet address 172.16.13.0 and the broadcast is 172.16.13.127
Please anyone to check this.
> If you have a 27-bit subnet mask, how many subnets and how many
> hosts do you have?
> A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286
subnets,
> 30 hosts D. 65,234 subnets, 62 hosts
C.
> Which layer defines the physical topology?
> A. Application B. Presentation C. Transport D. Network E. Physical .
E.
> What command sets up a secondary IP address of 192.15.1.7 with a
> class C netmask?
> A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7 2555.0.0.0
> secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
> 192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
> 255.255.255.0
D.
> What was the default Ethernet encapsulation on NetWare 3.11?
> A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap
B.
> What does CIDR stand for?
> A. C-class inter-domain routing B. Classfull inter-domain routing C.
> Classless internet domain routing D. Classless inter-domain routing
B.
> Which of the following switching types is the default for Cisco 5505s?
> A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free
B.
I think these Answers are correct but also I hope everybody help to confirm
these answers.
Regards,
Magdy H. Ibrahim
MCSE, CCNA
System Administrator
Purenet Internetworking
"Peter Peter" wrote in message
news:200102040443.XAA12469@xxxxxxxxxxxxxxxxx
> . Which commands will restart the router?
> A. system restart
> B. restart
> C. shutdown system
> D. down
> E. system exit
>
> Which command would you use to find the parameters for the clock?
> A. cl? B. show cl ? C. show cl? D. cl ?
>
> Which layer hides details of any network-dependent information from the
> higher layers by providing transparent data transfer?
> A. Session B. Transport C. Network D. Data Link E. Physical
>
> What command to disable edit mode?
> A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
> default
>
> Which frame has a Type field to identify the upper-layer protocol?
> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
>
> You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
> What is your class of address, subnet address, and broadcast address?
> A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C. 172.16.4.49
> to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62
>
> If you have a 27-bit subnet mask, how many subnets and how many
> hosts do you have?
> A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286
subnets,
> 30 hosts D. 65,234 subnets, 62 hosts
>
> Which layer defines the physical topology?
> A. Application B. Presentation C. Transport D. Network E. Physical .
>
> What command sets up a secondary IP address of 192.15.1.7 with a
> class C netmask?
> A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7 2555.0.0.0
> secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
> 192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
> 255.255.255.0
>
> If you want to configure the router configuration stored in NVRAM, which
> command should you use?
> A. config t B. config mem C. config TFTP D. config startup-config
>
> What was the default Ethernet encapsulation on NetWare 3.11?
> A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap
>
> What does CIDR stand for?
> A. C-class inter-domain routing B. Classfull inter-domain routing C.
> Classless internet domain routing D. Classless inter-domain routing
>
> Which of the following switching types is the default for Cisco 5505s?
> A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free
>
>
>
> Message Posted at:
> http://www.groupstudy.com/form/read.php?f=1&i=1855&t=1855
> --------------------------------------------------
> You are reading GroupStudy's Associate Mailing List. To unsubscribe
follow
> the directions on http://www.groupstudy.com/list/Associates.html
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=1863&t=1855
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html
