Is this a test for us? Do you know the answers or where to find them? Why
ask these questions of us? Be happy to help you find the answers but won't
just regurgitate it so you don't have to look them up :-)
----- Original Message -----
From: "Peter Peter"
To:
Sent: Saturday, February 03, 2001 9:47 PM
Subject: Can anyone answwer these Question [1:1856]
> Which commands will restart the router?
> A. system restart
> B. restart
> C. shutdown system
> D. down
> E. system exit
>
> Which command would you use to find the parameters for the clock?
> A. cl? B. show cl ? C. show cl? D. cl ?
>
> Which layer hides details of any network-dependent information from the
> higher layers by providing transparent data transfer?
> A. Session B. Transport C. Network D. Data Link E. Physical
>
> What command to disable edit mode?
> A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
> default
>
> Which frame has a Type field to identify the upper-layer protocol?
> A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II
>
> You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
> What is your class of address, subnet address, and broadcast address?
> A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C. 172.16.4.49
> to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62
>
> If you have a 27-bit subnet mask, how many subnets and how many
> hosts do you have?
> A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286
subnets,
> 30 hosts D. 65,234 subnets, 62 hosts
>
> Which layer defines the physical topology?
> A. Application B. Presentation C. Transport D. Network E. Physical .
>
> What command sets up a secondary IP address of 192.15.1.7 with a
> class C netmask?
> A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7 2555.0.0.0
> secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
> 192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
> 255.255.255.0
>
> If you want to configure the router configuration stored in NVRAM, which
> command should you use?
> A. config t B. config mem C. config TFTP D. config startup-config
>
> What was the default Ethernet encapsulation on NetWare 3.11?
> A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap
>
> What does CIDR stand for?
> A. C-class inter-domain routing B. Classfull inter-domain routing C.
> Classless internet domain routing D. Classless inter-domain routing
>
> Which of the following switching types is the default for Cisco 5505s?
> A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free
>
>
>
> Message Posted at:
> http://www.groupstudy.com/form/read.php?f=1&i=1856&t=1856
> --------------------------------------------------
> You are reading GroupStudy's Associate Mailing List. To unsubscribe
follow
> the directions on http://www.groupstudy.com/list/Associates.html
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=1862&t=1856
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List. To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html
