GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Help,Help,help!!!! [1:1855] posted 02/04/2001
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


. Which commands will restart the router? 
A. system restart 
B. restart 
C. shutdown system 
D. down 
E. system exit 

Which command would you use to find the parameters for the clock? 
A. cl? B. show cl ? C. show cl? D. cl ? 

Which layer hides details of any network-dependent information from the
higher layers by providing transparent data transfer?
A. Session B. Transport C. Network D. Data Link E. Physical 

What command to disable edit mode? 
A. End edit B. Disable edit C. Disable 0 D. Edit mode is not enabled by
default

Which frame has a Type field to identify the upper-layer protocol? 
A. 802.2 B. 802.5 C. 802.3 D. Ethernet_II 

You have an IP address of 172.16.13.5 with a 255.255.255.128 subnet mask.
What is your class of address, subnet address, and broadcast address?
A. 172.16.4.48 to 172.16.4.63 B. 172.16.4.49 to 172.16.4.63 C. 172.16.4.49
to 172.16.4.62 D. 172.16.4.55 to 172.16.4.62

If you have a 27-bit subnet mask, how many subnets and how many 
hosts do you have? 
A. 8190 subnets, 126 hosts B. 524,288 subnets, 32 hosts C. 524,286 subnets,
30 hosts D. 65,234 subnets, 62 hosts

Which layer defines the physical topology? 
A. Application B. Presentation C. Transport D. Network E. Physical . 

What command sets up a secondary IP address of 192.15.1.7 with a 
class C netmask? 
A. Ip address 192.15.1.7 255.255.255.0 B. Ip address 192.15.1.7 2555.0.0.0
secondary C. Ip secondary address 192.15.1.7 0.255.255.255 D. Ip address
192.15.1.7 255.255.255.0 secondary E. Secondary ip address 192.15.1.7
255.255.255.0
 
If you want to configure the router configuration stored in NVRAM, which
command should you use?
A. config t B. config mem C. config TFTP D. config startup-config 

What was the default Ethernet encapsulation on NetWare 3.11? 
A. Ethernet_II B. Ethernet_802.3 C. Ethernet_802.2 D. Ethernet_snap 

What does CIDR stand for? 
A. C-class inter-domain routing B. Classfull inter-domain routing C.
Classless internet domain routing D. Classless inter-domain routing
 
Which of the following switching types is the default for Cisco 5505s? 
A. Cut-through B. Store-and-forward C. Store-and-cut D. Fragment Free 



Message Posted at:
http://www.groupstudy.com/form/read.php?f=1&i=1855&t=1855
--------------------------------------------------
You are reading GroupStudy's Associate Mailing List.  To unsubscribe follow
the directions on http://www.groupstudy.com/list/Associates.html